The Hog Hunter

Probably the most hunted animal these days is the wild boar. With them being over populated in almost every state more and more people are beginning to hunt them, and many with handguns. If you are a handgun hunter and like the semi autos, this one is for you. It is our longslide HOG HUNTER. It is full custom from the ground up. With the longer slide and barrel you get a bit more power out of either the 10mm or 45 ACP, which makes it great for wild boar or just feral hogs.

A black and white picture of an 1 9 1 1 pistol.

This beauty is full custom with custom frame, slide, barrel, extended safety, extended slide release, custom trigger, beavertail, special sights and custom grips, plus a lot more. A gun built like this would normally run at least $2800. This beauty is specially priced at $2495. The gun shown is a 10mm but it is available in 45 ACP also.

The Hog Hunter
$2895.

The Long Slide Hunter

This is one of our very popular Longslide Hunters. This one is chambered in 10mm and with the longer barrel makes a great deer or hog gun. It is full custom from the ground up. It has a full action job including ramping and polishing and is very accurate. It has adjustable sights with a front night sight. Every part on this gun is a custom part.Custom beavertail, trigger, extended slide release and extended safety, custom grips of your choice and a lot more.

A black gun with a wooden handle on top of it.

This is one of our very popular Longslide Hunters. This one is chambered in 10mm and with the longer barrel makes a great deer or hog gun. It is full custom from the ground up. It has a full action job including ramping and polishing and is very accurate. It has adjustable sights with a front night sight. Every part on this gun is a custom part. Custom beavertail, trigger, extended slide release and extended safety, custom grips of your choice and a lot more.

The Long Slide Hunter
$2695.

The Rekon Kommander

Recently we decided to re-design the REKON KOMMANDER . This is the result of that decision. The new Rekon Kommander is full custom with a new redesigned slide, special hammer and trigger, gold accented small parts, Novak sights, full action job, ramped and polished, custom grips (the grips shown are Corian aged ivory, but you have other grip material to choose from), beavertail grip safety, checkered mainspring housing with custom mag well and a whole lot more. The new REKON KOMMANDER is priced at $2495 as you see it with us furnishing the base gun. So, here is the Rekon Kommander...

The Rekon Kommander

$2495

A black and white gun with a bone handle.

American Justice

This is our new AMERICAN JUSTICE, a 2 toned 10mm with all the bells and whistles. We have been working on this beauty for a good while now. This is the prototype of the series. It is a government length stainless slide with a satin Vapor Honed Black Chromex frame. The gun has a custom hammer, trigger, grips and sights. It has a scalloped mainspring housing. It has an extended safety, custom beavertail and has had a full action job, is ramped and polished and sighted in. If you have ever wanted a great 10mm but didn't want to spend $3000 for one, this one is for you. Everything you ever needed in a 10mm and more and priced right too. As always, one third down and we get started on your new AMERICAN JUSTICE.

A gun that is sitting on top of a table.

American Justice
$2495

The Enforcer

Our ENFORCER and is available in 45 ACP and in 10mm. The slide is 8" overall with a 2" comp. We build the comps here so the new ENFORCER can have whatever length comp you desire up to 3". The slide is a 6" longslide already and with the comp added, the weight up front plus the comp leaves the gun almost recoil free. With a 185 grain JHP this gun will easily do 1450 fps. It also comes in 10mm and in either caliber it will make a great hunting auto. The gun is full custom, with almost every part of the gun custom. It has an adjustable rear sight and Trijicon front. It has gray Marble Corian grips or the grips of your choice in Corian or laminated wood. Mongolian stag is available at a slight premium. . It has a full action job, is ramped and polished and the slide is smooth as silk. When shooting the gun and bringing it up for an offhand shot the gun just settles in your hand perfectly. That long nose and the weight out front helps hold the gun steady as a rock. The new Enforcer, in 45 or 10mm, built as you like.

A gun that is on display with its side open.

The Enforcer
$2995

Texas Ranger Classic

We are bringing back and revising some of our older series. One of those is our TEXAS RANGER CLASSIC. We have built this series in revolvers and in 1911s. The 1911s were quite a few years back so we are bringing it back and making it better than ever. The new TEXAS RANGER CLASSIC comes chambered in 45 ACP or in 10mm. The prototype is done in 45 ACP. It has all the goodies on it, like a beavertail grip safety, 3 dot sights, checkered mainspring housing, special trigger, stainless small parts, custom hammer, action job, and aged ivory Corian grips, or the grips of your choice.

A black and white gun with a bone handle.

Texas Ranger

$2495

Judge & Jury

Each of these 1911s has had a full reliability package, 3 hole match triggers installed and set, trigger pull lightened and smoothed, each gun has been fully dehorned, edges rounded, our deluxe Black Chromex added to each gun and custom grips fitted.

 

A black holster with two guns on it.

$2995 for this matched pair of 1911s

*Custom double holster available for $200.

One Asterisk (1*)

REEDER CUSTOM GUNS is happy to announce the continuation of one of the most popular and unusual self defense guns in our long line of full custom 1911s. This beauty is the 1*, or ONE ASTERISK. The 1* is a play on words and one should remember that when you buy a defense gun, always buy the best because you only have ONE ASS TO RISK. This custom 1911 saw the first light of day at the 1995 Safari Club International convention. We had a booth there and the gun was very popular at that show. The new 1* comes in either blue or stainless and features a full meltdown, Novak sights, our own style of round butt that we introduced as our Gunfighter Grip back in '95. Our Gunfighter Grip on the 1* is very similar to Ed Browns Bobtail only a bit more rounded. The One Asterisk is built on your 1911 base gun and features a perfectly fitted beavertail along with a lexan left grip panel that lets you see how many rounds you have in the magazine at a glance. A full custom hammer, custom trigger, extended safety, our own loaded chamber indicator, 1 magazine fit to the gun, complete action and timing job, and a soft Vapor Honed finish in either stainless or our Black Chromex finish round out this beauty. For a slight premium we can add an accessory/light rail to the gun. For the person wanting the most dependable 1911 on the market, it's our ONE ASTERISK. And as always one third down and we begin work on your new ONE ASTERISK.

A close up of a gun on the ground

The One Asterisk
$2495

Custom 1911's 1911 Gunworks

Projects - Grips - Accessories - Etc.

Original Armand Swenson custom 1911. Brought to us is pretty rough condition. We reworked it completely, installed a new National Match barrel and bushing, National Match trigger, full action job and Vapor Honed Black Chromex finish.

A close up of a gun with the handle removed

We have a good supply of real stag and can furnish stag grips for your Government, Commander or Officers model 1911...$295.

Above - on a Colt

Above - on a Springfield

A gun that is laying on top of a t shirt.

The Ultimate Hi Power

The new Ultimate Hi Power is just that, the ultimate in a Browning Hi Power. It has all the special features a Hi Power could have. We take the Hi Power slide, remove the fixed bushing in the front, rework the slide to take a standard bushing or bushing-type comp. We then build a whole new comp for it and fit it to the slide. We mill out the dovetails for Novak night sights, fit a new custom hammer, a new safety, ramp, and polish the barrel to feed anything. We perform a thorough inspection and adjustment on the action, tightening up everything inside for the utmost in accuracy. We then high-polish the gun, perform a full engraving job on it, and apply our deluxe Black Chromex finish, as well as fire blue the small parts. We build grips from scratch; in this case, we make them out of Corian in the aged ivory color. Finally, we do the test targets for the gun to make sure it. The new Ultimate Hi Power is priced at $2495 on your Hi Power. The options are various for this beauty. You can have it with a one port comp. You can have it without any engraving other than what the Feds require. You can have whatever grips you like, and you can have it all satin Vapor Honed if you like. Whichever way you go, it is still the Ultimate Hi Power. 

A gun that is sitting on top of a table.

The Ultimate Hi Power

$2495 on customer Hi Power